AC Lap Winding
AC LAP WINDING
AIM:
Design and draw a developed winding diagram of a double layer Lap winding for a three phase, 6 poles, 18 slots machine. Assume that the winding is full pitched.
PROCEDURE:
The following general commands are used to draw the developed AC lap winding diagram using Auto cad.
Step 1: Set the limits of the drawing screen.
Step 2: PUT ORTHO ON where ever necessary.
Step 3: Using OSNAP function.
Step 4: Draw conductors of appropriate dimension using LINE Command
Step 5: Use rectangular Array Command for making rows and columns of conductors
Step 6: Use p-line command for making arrows.
Step 7: Use Rectangular command for making poles.
Step 8: Make the numbers on the conductors using TEXT Command.
Step 9: Use Copy, Hatch, Donut, Arc Commands.
Step 10: Command: – q Save.
Solution:
Slots/pole/phase (spp)= 18/(6 x 3) = 1 slot
For full pitched coils, coil span= pole pitch =18/6=3 slots.
Top coil side 1 in slot 1 is connected to bottom coil side 8 in slot 4. Top coil side 3 in slot 2 is connected to bottom coil side 10 in slot 5 and so on.
Pole pitch corresponding to 180o electrical
Here, the no of slots in one pole pitch=3 slots
Thus one pole phase group consists of two slots.
Angle between consecutive slots = 180o /3 =60o electrical
We know that the phase one displaced by 120o electrical
No of slots by which the phase are displaced= 120o/60o = 2 slots
RESULT:
The AC Lap winding is drawn by using AutoCAD software.
Recent Comments