KPSC – Electrician Previous Important Questions

by · Published · Updated

#1. TRS cables suitable for....?

#2. Distance between clips on vertical runs shall not exceed...?

#3. Expansion of SPDT...?

#4. Size of plate electrode should not be less than...?

#5. Specific gravity of electrolyte can be measured by...?

#6. In which classification, the switch will belongs...?

#7. Which one has negative temperature coefficient of temperature...?

#8. Leakage current of an insulation having 10A as load current should not exceed...?

10/1000

#9. The materials used for making split rings...?

#10. To get sparkless commutation we use..?

#11. One joule is =...?

#12. The motor which require both AC and DC..:

#13. Stranding of cables is done by...:

#14. In series parallel grouping of cells maximum current is obtained when...:

#15. Which is not a passive device...?

#16. JEDEC Equivalent for BY127 diode is..:

#17. Shaded pole induction motor is suitable for...:

#18. For 7815 IC the minimum unregulated DC input voltage should be...:

#19. In wave winding the number of parallel path is...:

#20. Example of absolute type instrument is?

#21. In shaded pole motor the shading band is made by..:

#22. Lead acid cell is rechargeable, because of..:

#23. The Ni-Fe cell is a...:

#24. The effective resistance.... due to skin effect?

#25. Power factor of purely resistive circuit will be...?

finish

Results

You may also like...

error: Content is protected !!